Kenmore 7035 Series Use & Care Manual Download Page 22

Page: 22 / 48

USING YOUR REFRIGERATOR

INSTRUCTIONS FOR SMART GRID

IMPORTANT:

You must connect your Kenmore Smart appliance to the

internet and then register the appliance to your account

in order to use the Smart Grid function.

Consult the Quick Start Guide supplied with the

appliance for instructions on how to register your

appliance using the Kenmore Smart™ application (app).

To use the Smart Grid function, you need to register your

application with your electric utility company, provided

that your electric utility company supports the function. In

other words, the Smart Grid function will not be available

if your electric utility company does not support the

function or does not have the capability to support the

function.

The Smart Grid Button serves two purposes:

1) internet connection or disconnection, 2) enable or

disable/override the appliance Demand Response

capability.

NOTE:

This appliance is a connected-ready appliance,

allowing you to remotely monitor and control it from your

smart phone via the Kenmore Smart™ app.

To connect the refrigerator to the Internet:

Refer to the Quick Start Guide that came with your smart

appliance for detailed instructions on creating a Kenmore

account and setting up your appliance for connected

operation from your smart phone. This Use & Care Guide

contains information and instructions for operating

your appliance from the appliance control panel. For

additional assistance, visit http://www.kenmore.com/

smart

NOTE:

If no connection is made after 10 minutes the

blinking SMART GRID button LED will turn o

Smart Grid Operation:

Once connected and registered, the appliance is capable

of accepting a signal from your electrical company.

The signal, known as a Demand Response (DR) signal,

will adjust refrigerator operation to reduce power

consumption for a period of time ranging from a few

minutes up to a maximum of 4 hours. Ice making will be

delayed during this time. Opening the refrigerator door

may cancel certain DR signals.
The Grid Mode LED (red) will be steadily lit when the

signal is in e

ect. To disable the signal and prevent

further signal acceptance, press and release the Smart

Grid button. Both the Grid Mode and Smart Grid LED will

turn o

. Press and release the Smart Grid button again to

enable DR signal acceptance capability. The Smart Grid

button LED will relight. The Grid Mode LED will light when

another DR signal is sent.

Summary of Contents for 7035 Series

















































Search results

Summary of Contents for 7035 Series

Reviews:

Related manuals for 7035 Series

Brands by name

Popular brands

Kenmore 7035 Series, Use & Care Manual

Search results

Summary of Contents for 7035 Series

Reviews:

Related manuals for 7035 Series

Brands by name

Popular brands