REFRIGERATOR INSTALLATION
14
Removing the Right Door
1
Remove the top hinge cover screw (1). Lift the hook
(not visible), located at the bottom of the front side of
the cover (2), with a
p
at-head screwdriver.
Detach the wire harness (1).
3
Rotate the hinge lever (1) clockwise. Lift the top hinge
(2) free of the hinge lever latch.
Hinge Lever Latch
CAUTION
v
When lifting the hinge free of the latch, be
careful that the door does not fall forward.
Lift the door from the middle hinge pin and remove
the door.
NOTE
: Place the door, inside facing up, on a
nonscratching surface.
Replacing the Right Door
Install the right-side door
o
rst.
1
Make sure that the plastic sleeve is inserted in the
bottom of the door. Lower the door onto the middle
hinge pin as shown in the
o
gure.
Fit the hinge (1) over the hinge lever latch and slot it
into place. Rotate the lever (2) counterclockwise to
secure the hinge.
Hinge Lever Latch
3
Connect the wire harness (1).
Place the cover (1) in its place. Insert and tighten the
cover screw (2).
