Kenmore 7035 Series Use & Care Manual Download Page 11

Page: 11 / 48

REFRIGERATOR INSTALLATION

NOTE

: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow

opening. If it is necessary to remove the handles, follow the directions below.

REMOVING AND REPLACING HANDLES

NOTE

: Handle appearance may vary from the

illustrations on this page.

Removing Refrigerator Handle

Loosen the set screws with a

in. Allen wrench

and remove the handle.

NOTE

: If the handle mounting fasteners need

to be tightened or removed, use a ¼ in. Allen

wrench.

Replacing Refrigerator Handle

Place the handle on the door by

tting

the

handle footprints over the mounting

fasteners

and tightening the set screws

with a

in Allen

wrench.

NOTE

: If the handle mounting fasteners need

to be tightened or removed, use a ¼ in. Allen

wrench.

Mounting

Fasteners

Set Screw

Allen

Wrench

Mounting

Fasteners

Summary of Contents for 7035 Series

















































Search results

Summary of Contents for 7035 Series

Reviews:

Related manuals for 7035 Series

Brands by name

Popular brands

Kenmore 7035 Series, Use & Care Manual

Search results

Summary of Contents for 7035 Series

Reviews:

Related manuals for 7035 Series

Brands by name

Popular brands