17
4
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, the agitator must be cleaned every
time the belt is changed.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Cleaner Use
Clean Agitator
HEAVY - every
week
(used daily)
MODERATE -
every month
(used 2-3 times/week)
LIGHT -
every 2 months
(used 1 time/week)
IMPORTANT
Disconnect vacuum cleaner from
electrical outlet. Check and remove hair,
string and lint build-up frequently in the
Power-Mate
®
agitator and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator or end caps.
TO REPLACE BELT
1. Install new
belt in belt
groove on the
agitator
assembly, then
over the motor
shaft. Be sure
belt is under
the belt guard.
NOTE: See PARTS AND FEATURES for
Belt number.
2. Insert
both support
tabs into the
base slots.
Then snap
end caps into
place.
3. Line up
tabs on front
of base with
slots inside
the front
cover.
4. Tilt cover to
back. Press
cover firmly
until rear tabs
snap into
place.
5. Turn Power-Mate
®
over. Replace the
cover screws and lower the pile height
adjustment rollers into place.
Belt
Guard
Motor Shaft
Belt
Front
Support
Tab
Cover
Slot
Front
Base Tab
Rear Base Tab
End
Cap
End
Cap
Brush Unit
Belt Groove
AGITATOR ASSEMBLY
ENGLISH
Nettoyeur de
bords (Non ilustré)
Protecteur de
surcharge (Bouton
de remise en marche)
Tube
Tube
Porte-cordon
Porte - fiche
Réglage de
la hauteur
de poils
Courroie
Porte-cordon
Cordon
Power-Mate
®
Porte - cordon
PIÈCES ET CARACTÉRISTIQUES
Il est important de connaître les pièces et les caractéristiques de l’aspirateur pour l’utiliser correctement et en
toute sécurité. Lire cette section avant de l’utiliser.
POWER-MATE
®
Pièce
Nº aux
Nº Au
Etats-Unis
Canada
Courroie
20-5279
20-40111
