59 / 79
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
11-6. Pantry Drawer Cover and Cover Multi-duct Assembly
Step
Description
Step
Description
1
5
2
6
3
4
□
Remark :
11. Disassemble/Assemble Procedures
Remove vegetable cases,
vegetable cover, pantry
drawer. Loosen two screws
from water tank assembly.
Lift up the cover and pull it out a little to remove the
connector from back wall.
※ Follow the reverse order when assembling.
Remove two caps with a thin flat tool.
Loosen the upper
screw(big one;
outside diameter of
thread 5mm) and
lower screw(small
one; outside diameter
of thread 4mm)
• Do not use the small screw in the upper side of Multi-duct Assembly. The screw could be loose.
Hold the top side of
the Cover Multi-duct
and then pull it to
release hooks.
Disconnect two sensor
connectors and two
damper Connectors
from back wall.
