24 / 79
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
8. Operation and Functions
8-1. How to Use Control Panel
Button
Item
Display
Description
-
Initial Temperature by power input
88 LED
Freezer : 0ºF
/ Refrigerator : 37
ºF / Pantry room(optional) : “Produce”
ⓕ
Freezer Temperature
88 LED
ºF : 0
→ -2 → -4
→ -6
→
-8(Coldest)
→ 6
→ 4
→ 2 → (repeat)
℃ : -18 → -19 → -20 → -21 →
-22(Coldest)
→ -15 → -16 → -17 → (repeat)
Freezer Accela Chill Function
LED ①
□
How to Start : Press and hold this button for 3sec.
□
How to Proceed : the icon LED ON, Coldest Temp for 3000min
□
How to End : Time Limit or Any press for changing Temp or Power Rest
ⓡ
Refrigerator Temperature
88 LED
ºF : 37
→ 35 →
33(Coldest)
→ 45
→ 43
→ 41 → 39→ (repeat)
℃ : 3 → 2 →
1(Coldest)
→ 7 → 6 → 5 → 4→ (repeat)
Refrigerator Accela Chill Function
LED ②
□
How to Start : Press and hold this button 3sec.
□
How to Proceed : the icon LED ON, Coldest Temp for 360min
□
How to End : Time Limit or Any press for changing Temp or Power Rest
ⓓ →
ⓕⓡ
Switch Temperature Unit ºF ↔
℃
LED
In lock mode,
press and hold
ⓕ
and
ⓡ
buttons at the same time for 5sec
ⓐ
“Accela Ice” Function
LED ③
The icon LED On, Quick ice cube production mode for 24hr
If no water comes into the icemaker for 6hr, the operation is canceled.
Filter Reset
LED ④
Press and hold "Accela Ice” button for 3sec, “Replace Filter” icon LED OFF
※ After about 6 months from power on or Filter Reset, the icon LED ON.
ⓑ
Select Cubed Ice
LED
⑦
The icon LED ON;
The cubed/crushed ice comes out by pressing the dispenser lever.
ⓒ
Select Crushed Ice
LED
⑧
ⓑⓒ
Icemaker off
⑤
Press and hold
ⓑ
and
ⓒ
buttons for 3sec at the same time.
ⓓ
Turn Dispenser Lamp On
-
Press the “Light” button or push any dispenser lever.
Lock Control Function
⑥
Press and hold
ⓓ
button 3sec to stop operation of different buttons.
The ice or water dispenser does not work during lock mode.
Button
LED
1
2
6
5
3
4
ⓑ
ⓕ
ⓐ
ⓡ
ⓓ
ⓒ
8
7
