54 / 79
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
11-2. Water Tank and Cover Vegetable Assembly
Step
Description
Step
Description
1
5
2
6
3
7
4
8
□
Remark :
Remove two vegetable cases.
Press two fixing hooks in top of the divider and
pull the divide out from the vegetable cover.
Push the underside of the divider back and lift it
up. And then remove it from the pantry cover.
Remove the vegetable cover.
Remove one screws
and pull the tank to
the front.
Turn off the main water supply to the appliance.
Take off the front cover from
the water tank assembly to
see the water storage
condition.
※
The water need to be
removed from the water line
of refrigerator to replace new
tank.
11. Disassemble/Assemble Procedures
• Remove any residual matter inside the water supply line after installation.
1) Turn on the main water supply to the refrigerator .
2) Dispense water using dispenser for approx.10min to clean water and remove air from the lines.
3) And then check there are no water leaks or drips coming out from the water tank and dispenser.
4) If necessary, run water through the dispenser more.
※ Follow the reverse order when assembling.
Unscrew the water valve
assembly in machine room.
And separate the 5/16”(the big
one) tube from water valve.
Be careful not to be wet on
the floor.
Remove the water
inside water tank and water line.
