Kendrion Kuhnke Automation GmbH
Construction and Functionality
Vico MT
24
Ethernet "NET1" (X5)
The on-board 1000 Mbit base-T Ethernet adapter attaches the unit to a gigabit Ethernet network through its
RJ-45 connector.
It automatically detects and adapts the interface to 10BaseT or 100BaseT Ethernet networks.
The LEDs labelled "LNK" and "RCV" tell you whether the unit is properly connected to the network.
Cable: shorter than 30 m, shielded, min. Cat-5e
Pin wiring:
X5
NET1
Connector
Pin
Function
RJ45
S
Shield
Shield
1
D1+
TX+
2
D1-
TX-
3
D2+
RX+
4
D3+
5
D3-
6
D2-
RX-
7
D4+
8
D4-
LED "LNK"
green / orange
data link
LED "RCV"
orange
activity
Ethernet "NET2" (X6)
The on-board 10/100 Mbit base-T Ethernet adapter attaches the unit to a network through its RJ-45
connector. The LEDs labelled "LNK" and "RCV" tell you whether the unit is properly connected to the
network.
Cable: shorter than 3 m, shielded, min. Cat-5e
Pin wiring:
X6
NET2
Connector
Pin
Function
RJ45
1
TX+
2
TX-
3
RX+
4
75 Ohm
5
75 Ohm
6
RX-
7
75 Ohm
8
75 Ohm
LED "LNK"
green / orange
data link
LED "RCV"
orange
activity
NOTE
Unauthorised access to the computer
Controller failure and data loss
Integration in networks granting public access requires the user to take appropriate
measures aimed at preventing unauthorised access.
NET2
X6
NET1
X5
