59
A7 MIG Welder
© Kemppi Oy 2017
1735
OPERA
TING M
ANU
AL
5.2.6 I/O device errors
Code
Description
Severity
Measures
201
INPUT 1 ERROR
Input 1 reported an error.
Error
In addition to an ordinary input signal function, each input of
the I/O device can be configured to report an error or a warning
when the input status changes. The warning is just a notification
from an event - it does not prevent the operation of the welding
system. After clearing its cause, the warning state can be cleared.
The error stops welding and prevents operation of the welding
system until the situation is cleared and the error state is reset.
Both warnings and errors are recorded into the logbook.
See the A7 MIG Welder Integration guide for more information on
the input configuration.
202
INPUT 2 ERROR
Input 2 reported an error.
Error
203
INPUT 3 ERROR
Input 3 reported an error.
Error
204
INPUT 4 ERROR
Input 4 reported an error.
Error
205
INPUT 5 ERROR
Input 5 reported an error.
Error
206
INPUT 6 ERROR
Input 6 reported an error.
Error
207
INPUT 7 ERROR
Input 7 reported an error.
Error
208
INPUT 8 ERROR
Input 8 reported an error.
Error
209
INPUT 1 WARNING
Input 1 reported a warning.
Warning
210
INPUT 2 WARNING
Input 2 reported a warning.
Warning
211
INPUT 3 WARNING
Input 3 reported a warning.
Warning
212
INPUT 4 WARNING
Input 4 reported a warning.
Warning
213
INPUT 5 WARNING
Input 5 reported a warning.
Warning
214
INPUT 6 WARNING
Input 6 reported a warning.
Warning
215
INPUT 7 WARNING
Input 7 reported a warning.
Warning
216
INPUT 8 WARNING
Input 8 reported a warning.
Warning
