17
A7 MIG Welder
© Kemppi Oy 2017
1735
OPERA
TING M
ANU
AL
2/2
Copy from CH…
Create a new memory channel by
making a copy from an existing one.
Copy from CH
0 - 199
Select the channel where to make the
copy from.
*
The content of the list depends on the available curves and the selections in the
previous steps.
Edit channel (displayed when the selected channel is not empty)
Menu item
Value range
Description
1/6
Select weld curve
Change the weld curve. The curve
selection follows the same method as
when creating a new channel.
2/6
Welding parameters
*
Select welding parameters, like wire feed
speed and fine tuning. The list of the
available welding parameters depends on
the selected welding process.
3/6
Welding functions
*
Select welding functions, like hot start,
creep start and crater fill.
4/6
Advanced functions
*
Select advanced welding functions, like
WiseFusion and WisePenetration.
5/6
Copy channel to…
Make a copy from this memory channel to
another channel.
Copy channel to
0 - 199
Select the channel number where to make
the copy. Note that making the copy
to a non-empty channel overwrites the
channel data without confirmation.
6/6
Erase channel
Make this channel empty by erasing all
data from the channel.
*
See the tables
Welding parameters
and
Welding functions
for more information.
