32
Spare Parts
Assembling FA Pressure Conditioner:
Screw Pressure Conditioner body onto stand
FA Pressure Conditioner filter:
FA Pressure Conditioner contains a combined filter which removes:
Oil mist, smells and flavours from industrially produced compressed air
NOTE:
Filter does not remove CO and CO
₂
. Read instructions for use and replacement
Replacing FA Pressure Conditioner filters:
•
Unscrew top part of filter pressure container ( 6 screws )
•
Remove contaminated filter
•
Wipe inside of container clean
•
Check condition of rubber seal in top cover
•
Replace damaged seal
•
Install new filter on the container cover and screw it back
•
Check container for leakage
•
If container is not absolutely tight, tighten all top cover screws
Summary of Contents for Beta 90 FreshAir
Page 38: ...38 Replace lense Beta 90 FreshAir Delta 90 FreshAir...
Page 46: ...46 Taking into use...
Page 47: ...47 Taking into use...
Page 48: ...48 Taking into use...
