Kemper 150 0002, Manual

Page: 14 / 56

12
Read and follow these instructions before using the filter unit!
· Keep this Installation and Operating Manual handy.
· As voltage flashovers and the associated sparking must be constantly expected in an
electrostatic charging, the unit must not be used to extract highly inflammable or explosive gas
mixtures, such as solvent vapours.
· Attach the unit only to a bearing wall or column and use suitalbe screws and dovels for
attachement, depending on the substrate.
· Use only original equipment filter.
· Do not operate the unit without filter inserts.
· Protect the unit from dampness.
· Always interrupt the power supply before opening a switch box.
· Follow the specific data on the nameplate of your unit.
C. Mounting the Unit
C-1 Recommended Mounting Heights
Illustration 2