34
EN
KSB-170
IMPORTANT SAFETY INSTRUCTIONS
30. Do not operate the blender with a damaged cord or plug. If the supply cord is damaged,
It must be replaced by the manufacturer, its service agent in order to avoid a hazard.
31. Blades are sharp. Take extreme care when removing the attachment and cleaning it
to avoid injury.
32. Keep hands and utensils out of container while blending to reduce the risk of severe
injury to persons or damage to the blender. After the blade attachment has been removed
from the motor base and the blades have come to a standstill, you can continue working
on the contents.
33. Do not operate with loose or damaged blades. Contact your authorized KeMar service
representative for service or replacement.
34. When making nut butters or oil-based foods, do not process for more than one minute
After the mixture starts to circulate in the container. Processing for longer periods can
cause damage to the container and motor overheating.
35. To avoid a hazard, this device must not be connected to an external switch, e.g. a
timer, or to a circuit that is regularly switched on and off.
POWER CORD ADVICE
A) The power cord is short in order to avoid entanglement or tripping.
B) An extension cord can be added if used properly.
C) If extension cord is used:
(1) Its power capacity must at least be the same as that of the device's power consumption.
(2) The extension cord must not hang over the edge of the device. Ensure that children cannot
pull it and that the risk of tripping is low.
WARNING
Risk of electric shock!
Only use earthed electrical outlets!
Do not remove any of the earth wires!
Do not use an electrical adaptor!
If these instructions are not followed, there is a risk
Of fatal injury, fire or electric shock!
Summary of Contents for KSB-170
Page 55: ...Standmixer Blender KSB 170 ...
