Kellfri 35-FDM240, Manual

Page: 28 / 48

28 Table of Contents
ROTARY DISC
MOWERS
FILL WITH TRANSMISSION OIL
80W-140, OIL VOLUME IN THE CUTTERBAR
FILL WITH TRANSMISSION OIL
80W-90, OIL VOLUME IN THE GEARBOX
35-FDM240 2.0 L 0.4 L
SCYTHE MOWER - OIL CHANGE/OIL REFILLING
Interval:
IMPORTANT! CHANGE OIL IMMEDIATELY AFTER FIRST OPERATION!
Thereafter, every 300 hours
Oil should be changed at least once per season if the number of hours is less than 300.
Check before each operation:
- Oil level - refill as needed.
- Grease points - re-lubricate if necessary.
- Wear or damage to hydraulic hoses - always replace damaged hydraulic hoses.
Normal service life of hydraulic hoses is 5-6 years - it is important to replace hydraulic hoses before
they wear out.
Replace damaged blades immediately when the damage is detected.
Bear in mind the assembly position of the blades, left - right.
Always check the blades before and after using the rotary disc mower.
REPLACEMENT OF BLADES
NOTE It is very important to fill the exact quantity of oil into the cutterbar and gearbox.
(If there is too much oil, overheating will occur.)
Nylon nut