27
DISCONNECTING
•
Lower the machine and set the scythe mower on the ground (Illustration 1)
•
Important! Make sure that stabiliser - F (illustration 2) is standing firmly on the ground before
you disconnect the machine from the tractor
•
Disconnect the hydraulic couplings. IMPORTANT! Before you disconnect the hydraulic hoses,
make sure there is no pressure left in the system.
•
Disconnect the PTO shaft and then the machine from the tractor.
ILLUSTRATION 1
ILLUSTRATION 2
TRANSPORT MODE
When switching from transport mode to working mode.
Make sure there is no one in the risk zone .
May only be carried out when the tractor is standing
on a firm, level surface.
Summary of Contents for 35-FDM240
