KeLi XK3101, User Manual

Page: 14 / 17

Weight separate selective mode:
1
＃
relay: weight ≤ out 1 value, close
weight
＞
out 1 value, cut
2 ＃ relay: weight ＜ out 2 value, cut
weight ≥ out 2 value, close
Fixed value mode:
1
＃
relay: weight ≤ out 1 value, cut
weight ＞ out 1 value, close
2
＃
relay: weight
＜
out 2 value, cut
weight ≥ out 2 value, close
8.1.
Set-up steps of relay output
a. Press [Fn] and [0] buttons simultaneously, indicator displays “ ” 。
b. Press [Fn] button for three times, indicator displays “ ”
。
c. Press [Fn] button, indicator displays “1PXXXXX”, XXXXX is comparative value
out 1 of 1
＃
relay output. Press [Fn] button to move glittering bits, press [0]
button to change value.
d. Press [PT] button, indicator saves out 1, and displays “2PXXXXX”, XXXXX is
comparative value of 2
＃
relay output. Press [Fn] button to move glittering bits,
press [0] button to change value.
e. Press [PT] button, indicator saves out 2, and displays “F5.1 X”, set mode of
relay output. Press [Fn] button to choose parameters.
0: no action of relay
1: weight separate selective mode
2: fixed value mode
If users do not use relay output function, recommend you to set it to be zero
f. Press [PT] button, indicator displays “ ”
g. Press [PT[ button to quit out
9. Set-up serial interface
Serial interface can set to command mode or continuous transmit mode. Baud rate
can choose 1200, 2400, 4800 or 9600.
Note: The original mode is continuous transmit mode, it can be changed to
command mode according to user’s needs.
9.1.
Set-up steps
a. Press [Fn] and [0] buttons simultaneously, indicator displays “ ”
b. Press [Fn] button for two times, indicator displays “ ”
c. Press [PT] button, indicator displays “F3.1 X”, parameter X stands for baud
rate, press [Fn] button to choose parameters:
F3.1=0, 1200 baud rate
F3.1=1, 2400 baud rate
www.kelichina.com
Page 14 of 17