Model 2470 High Voltage SourceMeter Instrument User's Manual
Section 3: Using a remote interface
2470-900-01 Rev. A /
May
2019
3-11
9.
In the Virtual Instrument Name box, enter a name that you want to use to refer to the instrument.
10. Select
Finish
.
11. Select
Cancel
to close the Wizard.
12. Save the configuration. From the Keithley Configuration Panel, select
File > Save
.
Verify the instrument through the Keithley Communicator:
1.
Click
Start > Keithley Instruments > Keithley Communicator
.
2.
Select
File > Open Instrument
to open the instrument you just named.
Figure 17: Keithley Communicator Open an Instrument
3.
Click
OK
.
4.
Send a command to the instrument and see if it responds.
If you have a full version of NI-VISA on your system, you can run NI-MAX or the VISA Interactive
Control utility. See the National Instruments documentation for information.
Summary of Contents for SourceMeter 2470
Page 2: ...High Voltage SourceMeter Instrument User s Manual Model 2470...
Page 6: ......
Page 24: ......
Page 44: ......
