![background image](http://html1.mh-extra.com/html/keithley/pio-24/pio-24_user-manual_3962577022.webp)
2-2
Installation
General
This chapter contains instructions for installing the PIO-24. The chapter begins
with procedures for unpacking and inspection and follows with descriptions of the
options and methods for setting all configurable parameters. Hardware installation is
the final topic.
Unpacking and inspecting
After removing the wrapped board from its outer shipping carton, proceed as
follows:
1.
Place one hand firmly on a metal portion of the computer chassis (the com-
puter must be turned OFF and grounded) to discharge static electricity from
the package and your body, thereby preventing damage to board components.
2.
Carefully unwrap the board from its antistatic wrapping material.
3.
Inspect the board for signs of damage. If any damage is apparent, return the
board to the factory.
4.
Check the contents of your package against its packing list to be sure the order
is complete. Report any missing items immediately.
You may find it advisable to retain the packing material in case the board must be
returned to the factory.
Switch and jumper settings
The PIO-24 contains a switch for setting Base Address and jumper pads for select-
ing Interrupt Level and board location. Each is shown in Figure 2-1 and described in
the following subsections.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com