Keithley DMM7510, Reference Manual

Page: 878 / 1036

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual Section 8: TSP command reference
DMM7510-901-01 Rev. B / May 2015 8-265
Details
Setting the pulse width to zero (0) seconds asserts the trigger indefinitely. To release the trigger line,
use
trigger.digout[ N ].release()
.
Example
digio.line[4].mode = digio.MODE_TRIGGER_OUT
trigger.digout[4].pulsewidth = 20e-6
Sets the pulse width for trigger line 4 to
20
µ
s.
Also see
digio.line[N].mode (on page 8-52)
digio.line[N].reset() (on page 8-54)
Digital I/O port configuration (on page 3-49)
trigger.digout[N].assert() (on page 8-263)
trigger.digout[N].release() (on page 8-265)
trigger.digout[N].release()
This function releases an indefinite length or latched trigger.
Type TSP-Link accessible
Affected by Where saved Default value
Function Yes
Usage
trigger.digout[ N ].release()
N Digital I/O trigger line (1 to 6)
Details
Releases a trigger that was asserted with an indefinite pulsewidth time. It also releases a trigger that
was latched in response to receiving a synchronous mode trigger. Only the specified trigger line is
affected.
Example
digio.line[4].mode = digio.MODE_TRIGGER_OUT
trigger.digout[4].release()
Releases digital I/O trigger line 4.
Also see
digio.line[N].mode (on page 8-52)
Digital I/O port configuration (on page 3-49)
trigger.digout[N].assert() (on page 8-263)
trigger.digout[N].pulsewidth (on page 8-264)