Model DMM7510 7½ Digit Multimeter User's Manual
Section 4: Making basic front-panel measurements
DMM7510-900-01 Rev. B / May 2015
4-3
Basic front-panel measurements
The following procedures show you how to make a measurement, access settings for the
measurement, and view measurement data in a reading buffer.
You can make measurements continuously or manually. When you make continuous measurements,
the instrument makes measurements as quickly as possible. When you make manual measurements,
the instrument makes measurements when you press the TRIGGER key.
To make a measurement from the front panel:
1. Press the
POWER
button on the front panel to turn on the instrument.
2. From the Functions swipe screen, select
2W
Ω
. Measurements begin to display on the top half of
the Home screen.
3. If measurements are not displayed, press the
TRIGGER
key for a few seconds and select
Continuous
Measurement.
Change measure settings:
1. Press the
MENU
key.
2. Under Measure, select
Settings
.
3. Select
Display Digits
.
4. Select
3.5 Digits
.
5. Press the
HOME
key. The measurement now shows 3½ digits.
To make a single measurement:
1. Press the front-panel
TRIGGER
key for a few seconds.
2. Select
Manual Trigger Mode
.
3. Press the
TRIGGER
key to initiate a single reading using the selected measure function.
Figure 22: Basic measurement test results
北京海洋兴业科技股份有限公司(证券代码:839145)
电话:010-62176775
网址:www.hyxyyq.com