Model DMM7510 7½ Digit Multimeter User's Manual
Section 3: Using a remote interface
DMM7510-900-01 Rev. B / May 2015
3-11
Verify the instrument through the Keithley Communicator:
1. Click
Start > All Programs > Keithley Instruments > Keithley Communicator
.
2. Select
File > Open Instrument
to open the instrument you just named.
Figure 19: Keithley Communicator Open an Instrument
3. Click
OK
.
4. Send a command to the instrument and see if it responds.
If you have a full version of NI-VISA on your system, you can run NI-MAX or the VISA Interactive
Control utility. See the National Instruments documentation for information.
If you have the Agilent IO Libraries on your system, you can run Agilent Connection Expert to check
your USB instruments. See the Agilent documentation for information.
Using the web interface
The Model DMM7510 web interface allows you to make settings and control your instrument through
a web page. The web page includes:
•
Instrument status.
•
The instrument model, serial number, firmware revision, and the last LXI message.
•
An ID button to help you locate the instrument.
•
A virtual front panel and command interface that you can use to control the instrument.
•
Download access to a .csv file that contains reading buffer data.
•
Administrative options and LXI information.
The instrument web page resides in the firmware of the instrument. Changes you make through the
web interface are immediately made in the instrument.
北京海洋兴业科技股份有限公司（证券代码：839145）
电话：010-62176775
网址：www.hyxyyq.com
