iv
7
Calibration
Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Switch, Jumper, and Potentiometer Locations . . . . . . . . . . . . . . . 7-2
8
Troubleshooting
Problem Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Identifying Symptoms and Possible Causes . . . . . . . . . . . . . . 8-1
Testing the Board and Host Computer . . . . . . . . . . . . . . . . . . 8-4
Testing the Accessory Slot and I/O Connections . . . . . . . . . . 8-4
Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
A
Specifications
B
Connector Pin Assignments
Index
List of Figures
Figure 2-1.
Block Diagram of DDA-06 . . . . . . . . . . . . . . . . . . 2-1
Figure 3-1.
Switch and Jumper Locations . . . . . . . . . . . . . . . . 3-3
Figure 4-1.
Pin Assignments for the Main I/O Connector . . . .4-1
Figure 4-2.
Attaching an STA-U, SSIO-24, or ERB-24. . . . . .4-2
Figure 4-3.
Attaching an STC-37 Accessory . . . . . . . . . . . . . . 4-2
Figure 4-4.
Voltage Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Figure 4-5.
4 to 20 mA Current Output (Floating Load) . . . . .4-3
Figure 4-6.
4 to 20 mA Current Output (Grounded Load) . . . .4-4
Figure 7-1.
Switch, Jumper, and Potentiometer Locations. . . .7-2
Figure B-1.
Main I/O Connector Pin Assignments . . . . . . . . . B-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
