5-1
5
The Control Panel
The Control Panel is a utility program (CTL06W.EXE) for testing the
functions of your DDA-06 boards in the Windows environment. This
program is a part of the DDA-06 software package.
To use the Control Panel, perform the following steps:
1. Start the Control Panel from the Windows environment by clicking on
Run in the File menu of the Program Manager and making the
following entry in the Command Line dialogue box:
path\CTL06W
Use the Browse option to determine the path.
2. To configure the base address and DAC output ranges, select File
from the Control Panel menu. When the Control Panel displays the
File menu, select Config to display the Configuration setup panel for
your selections.
3. To set up and perform an analog output operation, select Analog from
the Control Panel menu. When the Control Panel displays the Analog
menu, select Single to display the Single Point Output or Multiple to
display Multiple Point Output setup panel for your entries.
4. To set up and perform a digital I/O operation, select Digital from the
Control Panel menu to display the DIGITAL setup panel for your
selections and entries.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com