3-4
Installation
DriverLINX Installation Options
The component installation options provided by the DriverLINX setup
program are as follows:
●
Install Drivers
— This required component installs only the files you
need for configuring your hardware and running third-party
data-acquisition applications that require DriverLINX.
●
Install Interfaces
— This optional component installs the files and
example programs that you will need to develop custom applications
for DriverLINX using C/C++, Visual Basic, and Delphi.
●
Install Documentation
— This optional component installs this
manual and the electronic documentation for DriverLINX, all of
which you can read, search, and print using the Adobe Acrobat
Reader.
●
Install Acrobat
— This optional component installs the Adobe
Acrobat Reader for the DriverLINX electronic documentation.
●
LabVIEW™ Support
— DriverLINX for the DAS-TC/B Series
includes a copy of DriverLINX for LabVIEW. This optional
component installs a complete set of Virtual Instruments to use
Keithley hardware in National Instruments LabVIEW. Before you
can install this optional component, you must first install DriverLINX
drivers and LabVIEW.
DriverLINX Installation Procedure
Install the DriverLINX software components as follows:
1. Place the DriverLINX DAS-TC/B Series CD-ROM in your drive and
wait a few seconds. On most systems, setup starts automatically. If
not, run the setup.exe file found in the root directory of the CD-ROM.
A DriverLINX Browser Introduction screen
appears. Thereafter, the
DriverLINX CD Navigator screen appears automatically after waiting
a few seconds or after clicking
Next
.
