manualshive.com logo in svg

Keithley DAS-1800ST Series, User Manual, Page: 100 / 139

Share
Download
Keithley DAS-1800ST Series User Manual Download Page 100

 

A-6

Specifications

 

Minimum external pacer 
clock pulse width

10ns

Maximum external pacer 
clock rate

98kHz 

Minimum hardware trigger 
pulse width

10ns

Triggering:

Source

Types

• Internal clock, internal gate
• Internal clock, external trigger (edge)
• Internal clock, external gate (level)
• External clock, internal gate
• External clock, external trigger (edge)
• External clock, external gate (level)
• All the above with programmable edge/level sense

• Post-trigger
• Pre-trigger
• About-trigger (using counter 0)

Pacer Clock:

Internal

External

32-bit counter (82C54)

Programmable edge sense (±)

Support for board-to-board 
synchronization (XTRIG 
input)

• 4-bit digital input port
• 4-b latched digital output port (with latch strobe)

 

1 

 

Monotonicity is guaranteed to 16 bits.

 

2 

 

The figures in the table show the electrical noise introduced by the analog front end and include the 

quantization noise.

 

Table A-2.  Analog Input Specifications for DAS-1800HR Series (cont.)

 

Feature

DAS-1802HR/HR-DA

Artisan Scientific - Quality Instrumentation ... Guaranteed  |  (888) 88-SOURCE  |  www.artisan-scientific.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for DAS-1800ST Series












































































































































Reviews:

No comments