Keithley 6512, Instruction Manual

Page: 156 / 156

i-3
Specifications 1-2
SRQ mask 3-9
SRQ mask (M) and status byte format
3-9
SRQ and status byte program D-4
Static charge detection 4-11
Status byte 3-10
STATUS indicators 2-5
Status (U) 3-16
Status word 3-16
Status word bit positions E-1
Status word prefixes E-1
Status word program D-5
T
Talk-only mode 3-23
Terminator (Y) 3-20
Test fixtures 1-4
Theory of operation 6-1
Thermal EMFs 2-32
Tilt bail 2-5
Trigger cables 1-4
Trigger mode (T) 3-15
Trigger overrun error 3-24
Triggering example 2-30
Troubleshooting 7-11
U
Unaddress commands A-5
Unguarded resistance measurements 4-5
Uniline commands A-4
Universal commands A-4
Unpacking and inspection 1-2
Using the coulombs function to mea-
sure current 2-16
Using external feedback 2-21
Using the ohms function as a current
source 2-18
Using suppression 2-26
Using zero correct and baseline sup-
pression 2-25
V
V,
Ω
GUARD switch 2-7
Valid command strings 3-2
Verification procedures 5-2
V/I resistance measurements with ex-
ternal voltage source 4-8
Voltage coefficients of high-megohm
resistors 4-10
Voltage measurement considerations 2-10
Volts calibration 7-6
Volts verification 5-3
W
Warm-up period 2-8
Warranty information 1-1
Z
Zero check 6-6
Zero check (C) 3-6
Zero correct (Z) 3-21
Zero correct and zero check 2-25