![background image](http://html1.mh-extra.com/html/keithley/6512/6512_instruction-manual_4063439127.webp)
8-1
8.1
Introduction
This section contains replacement parts information, sche-
matic diagrams, and component layout drawings for the
Model 6512 Electrometer.
8.2
Parts list
Parts for the Model 6512 are listed in tables integrated with
the schematic diagrams and component layout drawings on
the following pages. See Figure 7-5 in Section 7 for an ex-
ploded view of the instrument that identifies many mechani-
cal parts.
8.3
Ordering information
Keithley Instruments, Inc. maintains a complete inventory of
all normal replacement parts. To place an order, or to obtain
information concerning replacement parts, contact your Kei-
thley representative or the factory. When ordering parts, in-
clude the following information:
1. Instrument Model Number
2. Instrument Serial Number
3. Part Description
4. Circuit designation, including schematic diagram and
component layout numbers (if applicable).
5. Keithley Part Number
8.4
Factory service
If the instrument is to be returned to the factory for service,
carefully pack the unit and include the following:
1. Complete the service form which follows this section,
and return it with the instrument.
2. Advise as to the warranty status of the instrument (see
the inside front cover for warranty information).
3. Write the following on the shipping label: ATTENTION
REPAIR DEPARTMENT.
8.5
Component layout drawings and
schematic diagrams
Component layout drawings and schematic diagrams for the
mother board, electrometer board, and the display board are
located on the following pages.
8
Replaceable Parts
Summary of Contents for 6512
Page 119: ...Maintenance 7 10 Figure 7 5 Exploded view...
Page 131: ......