![background image](http://html2.mh-extra.com/html/keithley/6487/6487_user-manual_3951658018.webp)
Getting Started
1-3
Contact information
Worldwide phone numbers are listed at the front of this manual. If you have any questions,
please contact your local Keithley representative or call one of our Application Engineers
at 1-800-348-3735 (U.S. and Canada only).
Safety symbols and terms
The following symbols and terms may be found on the instrument or used in this manual:
If
or
is present, connect it to safety earth ground using the wire recommended in
the user documentation.
The
symbol on an instrument indicates that the user should refer to the operating
instructions located in the manual.
The
symbol on an instrument shows that it can source or measure 1000 volts or more,
including the combined effect of normal and common mode voltages. Use standard safety
precautions to avoid personal contact with these voltages.
The
WARNING
heading used in this manual explains dangers that might result in per-
sonal injury or death. Always read the associated information very carefully before per-
forming the indicated procedure.
The
CAUTION
heading used in this manual explains hazards that could damage the
instrument. Such damage may invalidate the warranty.
Unpacking and Inspection
Inspection for damage
The Model 6487 was carefully inspected electrically and mechanically before shipment.
After unpacking all items from the shipping carton, check for any obvious signs of physi-
cal damage that may have occurred during transit. (There may be a protective film over the
display lens, which can be removed). Report any damage to the shipping agent immedi-
ately. Save the original packing carton for possible future shipment. Before removing the
Model 6487 from the bag, observe the handling precautions discussed below.
Handling precautions
•
Always grasp the Model 6487 by the covers.
•
After removing the Model 6487 from its anti-static bag, inspect it for any
obvious signs of physical damage. Report any such damage to the shipping agent
immediately.
•
When the Model 6487 is not installed and connected, keep the unit in its anti-static
bag and store it in the original packing carton.
!
Summary of Contents for 6487
