Model 4210 MMPC-S Quick Start Guide
PA-1000 Rev. B / January 2010
3
I-V testing
For I-V testing, connect the triax cables of your Model 4200 source-measure units (SMUs) to the standard female
triax connectors on the bulkhead of the prober. Figure 3 shows two Model 4200 SMU prober connections.
NOTE
Figure 3 shows SMUs that do not use preamps. These SMUs use the supplied triax
cables that are terminated with a miniature triax connector on one end and a standard
triax connector on the other end. If your SMUs are equipped with preamps, use the
supplied cables that are terminated with standard triax connectors on both ends.
Figure 3 shows both cables.
Figure 3: Model 4200 SMU connections to the prober