background image

 

 

 

Keithley Instruments, Inc. 

28775 Aurora Road 
Cleveland, Ohio 44139 
1-888-KEITHLEY 
www.keithley.com 

 

PA-1000 Rev. B / January 2010 

1  

Model 4210-MMPC-S

Multi-Measurement Prober Cable Kit 

Quick Start Guide

Overview

 

The Keithley Instruments Model 4210-MMPC-S multi-measurement cable kit (see Figure 1) is a collection of 
standard and custom connectors and accessories used to take I-V and C-V measurements using a single prober 
cable setup. It is also used with the Keithley Model 4200-PIV-A package to perform pulse I-V measurements. This 
kit has been assembled for use with the Suss Micro Tec PA200/300 prober series.  

NOTE 

For C-V testing, this Quick Start Guide applies to both the Model 4200-CVU card and 
the new 1 kHz Model 4210-CVU card. For pulse I-V testing, this guide also applies to 
the Models 4200-PG2 and 4205-PG2 pulse generators.  

Prober cable kit contents 

Figure 1 shows the cables, adapters, and supplies that are included in the Model 4210-MMPC-S                       
multi-measurement cable kit. 

Figure 1: Model 4210-MMPC-S multi-measurement prober cable kit 

 

Summary of Contents for 4210-MMPC-S













Reviews: