Model 4210 MMPC-S Quick Start Guide
2
PA-1000 Rev. B / January 2010
Quick Start Guide topics
The guide contains information about the installation and use of this cable kit:
•
Connecting Model 4200
instrumentation to the prober bulkhead: Explains how to make connections from
the Model 4200 to the prober bulkhead.
•
Installing the prober cable kits
: Explains how to make connections from the prober bulkhead to the prober
pins.
•
Usage scenarios:
Provides the specific prober cable setups for I-V testing (2-wire and 4-wire) and C-V
testing (2-wire and 4-wire). It also provides the setup for performing pulse I-V measurements using the
Keithley Model 4200-PIV-A.
Related documents
The following documents (in PDF format) are located on the Model 4200 Complete Reference CD:
•
PA-993:
This is a one-page packing list for the Model 4210-MMPC-S Multi-Measurement Prober Cable Kit
for the Suss Micro Tec PA200/300 series prober. A photo shows all the components of the cable kit.
•
PA-994:
This is a one-page packing list for the Model 4210-MMPC-C Multi-Measurement Prober Cable Kit
for the Cascade MicroTech 12000 series prober. A photo shows all the components of the cable kit.
•
White Paper
– Labs’ Demands for Greater Measurement Flexibility Require Cabling Systems Capable of
Accommodating Multiple Measurement Types: This white paper explains the different cabling requirements
for I-V, C-V, and pulse I-V testing. It also describes an easy-to-use single multi-measurement cabling
system (Model 4210-MMPC-S for the Suss Micro Tec PA200/300 prober).
Connecting Model 4200 instrumentation to the prober bulkhead
WARNING
To prevent injury or death due to electric shock, remove all power from the
Model 4200-SCS and shut down the Suss prober before installing the prober
cable kit.
The Model 4200 connects to the female triax connectors on the prober bulkhead. Figure 2 shows the triax
connectors on one of the two connection panels of the prober.
Figure 2: Prober bulkhead female triax connectors
