![background image](http://html2.mh-extra.com/html/keithley/2701/2701_instruction-manual_3955453055.webp)
A-2
Cable diagrams
Model 2701 Instrument Networking Instruction Manual
Ethernet cables
For 10BaseT and 100BaseTX Ethernet connections, use standard category five (CAT 5)
twisted pair patch cables with RJ-45 connectors, not to exceed the standard maximum segment
length of 100 meters. The equipment that the device is being attached to will determine
whether a straight-thru or cross over cable configuration is required.
Straight through cables
Standard Ethernet straight through cables are required when connecting the device to a stan-
dard network hub or switch.
NOTE
Straight through cables are also referred to as patch cables.
Figure A-1
Straight through cables
1
8 1
8
1 – Orange/White
2 – Orange
3 – Green/White
4 – Blue (not used)
5 – Blue/White (not used)
6 – Green
7 – Brown/ White (not used)
8 – Brown (not used)
1 – Orange/White
2 – Orange
3 – Green/White
4 – Blue (not used)
5 – Blue/White (not used)
6 – Green
7 – Brown/ White (not used)
8 – Brown (not used)
1
2
3
6
1
2
3
6
Pin Assignments
Ethernet Straight Through Cables
Summary of Contents for 2701
