26
Quick Reference Guide
Remote math functions
Table 11
summarizes commands to control the measurement math functions by remote,
while
Table 12
shows a programming example.
Table 11
Math function commands
Command
Description
:CALCulate[1]:DATA?
:CALCulate[1]:FORMat <function>
:CALCulate[1]:KMATh:MMFactor <M>
:CALCulate[1]:KMATh:MBFactor <B>
:CALCulate[1]:KMATh:MUNits“<units>”
:CALCulate[1]:STATe <state>
:CALCulate2:DATA?
:CALCulate2:KMATh:MBFactor <B>
:CALCulate2:KMATh:MMFactor <M>
:CALCulate2:KMATh:MUNits “<units>”
:CALCulate2:STATe <state>
:CALCulate3:DATA?
:CALCulate3:KMATh:MBFactor <B>
:CALCulate3:KMATh:MMFactor <M>
:CALCulate3:KMATh:MUNits “<units>”
:CALCulate3:STATe <state>
:CALCulate4:DATA?
:CALCulate4:STATe <state>
:INIT
Request laser diode math reading.
Set laser diode math function (MXB[1],
CONDuctance[1], POWER[1], or
RESistance[1]).
Set laser diode MX + B offset (B) value
Set laser diode MX + B slope (M) value.
Set 1-character MX + B units suffix.
Enable/enable laser diode math (ON or
OFF).
Request detector #1 math reading.
Set detector #1 MX + B offset (B).
Detector #1 MX + B slope (M).
Set 1-character MX + B units suffix.
Enable/enable detector #1 math. (ON or
OFF).
Request detector #2 math reading.
Set detector #2 MX + B offset (B).
Detector #2 MX + B slope (M).
Set 1-character MX + B units suffix.
Enable/enable detector #2 math. (ON or
OFF).
Request delta reading (I
PD1
-I
PD2
).
Enable/enable delta (ON or OFF).
Trigger CALC readings (must use before
sending CALCn:DATA?).