![background image](http://html2.mh-extra.com/html/keithley/2520/2520_quick-reference-manual_4000673013.webp)
4
Quick Reference Guide
Figure 4
Testhead rear panel
Navigating menus and entering numeric data
Menu navigation
Many operating modes for the Model 2520 are configured using front panel menus.
Throughout this guide, menu navigation will be presented as a sequence of key presses
and menu item selections. For example, the following sequence selects the current source
pulse mode:
Press CONFIG > press LASER I
L
> select SHAPE > select PULSE.
The above sequence is explained as follows:
1.
Press the CONFIG key.
2.
Press the LASER I
L
key.
3.
Select the SHAPE menu item.
4.
Select the PULSE mode.
A menu item is selected by placing the cursor on it and pressing the ENTER key. The
EDIT
and
keys control cursor position.
ENABLED
DISABLED
(PULL TO
REMOVE)
1
9
ENABLED
DISABLED
BOTH INTERLOCKS MUST BE ENABLED TO OPERATE
!
MAINFRAME
CONN 1
MAINFRAME
CONN 2
REMOTE
INTERLOCK
INTERLOCK
STATUS
LASER
POWER
ON
GREEN=ENABLED
RED=DISABLED
KEY
INTERLOCK
▲
▲