Model 2110 5½ Digit Multimeter Reference Manual
Section 2: General overview
2110-901-01 Rev. C/August 2013
2-15
Keys, menus, and selection
Description
RANGE
Use ► and ◄ keys to display additional selections. Refer to
(on page 3-39) for details.
CAP
Select CAP to configure capacitance as the second function.
RANGE
Use ► and ◄ keys to display additional selections. Refer to
(on page 3-39) for details.
TEMP
Select TEMP to configure temperature as the second function.
SENSOR
Select the RTD sensor type. Use ► and ◄ keys to display
additional selections.
UNITS
Specify units for temperature measurement (C, F, or K).
TRANSDUCER
Select the temperature transducer type (2-wire RTD or 4-wire RTD).
TCOUPL
Select TCOUPL to configure thermocouple as the second function.
TYPE
Select TYPE to configure the thermocouple type.
UNITS
Specify units for temperature measurement (C, F, or K).
RJUNCTION
Specify reference junction type, real or simulated (REAL or
SIMulated).
REAL
Select REAL.
SIMULATED
Select SIMULATED.
VIEW REAL
Select VIEW REAL to view the temperature of the internal reference
junction.
TRIGGER (AUTO/HOLD)
Press
TRIGGER
(AUTO/HOLD)
to toggle the reading hold function
on and off. Refer to
(on page 3-35) for details.
STORE (RECALL)
Press
STORE (RECALL)
to view stored readings. Refer to
(on page 3-36) for details.
DIGITS (FILTER)
Press
DIGITS (FILTER)
to select the type of filter for the
measurement on the selected function, or to turn the filter off. Use
► and ◄ keys to display additional selections. Refer to
(on page 3-47) for details about moving average and repeat
average.
OFF
Turn the filter off.
MOVING AVERAGE
Select to configure MOVING AVERAGE. Use ► and ◄ keys to
display additional selections.
RUN
Select RUN to start the function.
READINGS
Enter the number of readings using ▲ ▼ ► ◄ keys.
REPEAT AVERAGE
Select to configure REPEAT AVERAGE. Use ► and ◄ keys to
display additional selections.
RUN
Select RUN to start the function.
READINGS
Enter the number of readings using ▲ ▼ ► ◄ keys.
