Keithley 2110, Reference Manual, Page: 162 / 221

Model 2110 5½ Digit Multimeter Reference Manual Section 5: Remote commands
2110-901-01 Rev. C/August 2013 5-55
[SENSe:]TEMPerature:RTD:TYPE <name>
Use this command to select the RTD sensor type for temperature measurement with RTD.
Parameters
<name> description
PT100 Select RTD type PT100.
D100 Select RTD type D100.
F100 Select RTD type F100.
PT385 Select RTD type PT385.
PT3916 Select RTD type PT3916.
USER Select RTD type USER.
SPRTD Select RTD type SPRTD.
NTCT Select RTD type NTCT.
Query
command description
[SENSe:]TEMPerature:RTD:TYPE? Query the RTD type for temperature measurement with RTD.
Details
Refer to Thermocouple measurements (on page 3-22) and RTD coefficients and temperature calculation (on
page 3-19) for information about RTD coefficients.
[SENSe:]TEMPerature:RTD:RZERo <n>|MIN|MAX
Use this command to set the R-Zero coefficient at 0 degrees Celsius for the user-defined RTD type.
Parameters
<n> description
10 to 1000 Select the R-Zero coefficient at 0 degrees Celsius.
MINimum Select the minimum coefficient.
MAXimum Select the maximum coefficient.
Query
command description
[SENSe:]TEMPerature:RTD:RZERo? Query the R-Zero coefficient at 0 degrees Celsius
for the user-defined RTD type.
[SENSe:]TEMPerature:RTD:RZERo? MIN Query the minimum R-Zero coefficient at 0 degrees
Celsius for the user-defined RTD type.
[SENSe:]TEMPerature:RTD:RZERo? MAX Query the maximum R-Zero coefficient at 0 degrees
Celsius for the user-defined RTD type.
Details
Refer to the following topic in the Temperature measurement (on page 3-17) section for more information about
RTD type: RTD coefficients and temperature calculation (on page 3-19).