2.2.3.1 Cable Connections
There are 2 CV output ports on the left side of the QuNexus and 1 CV input port on the right
side.
Outputs
- Since the two output ports use stereo 1/8in connectors (TRS - shown below), they
provide 4 outputs: a gate output and three 16-bit CV outputs. Output voltages range from 0 to
5V.
Inputs
- The input port should be used with a TRRS connector (shown below) to access both
CV inputs and the 5V Power for an expression pedal. QuNexus' CV In is uni-polar. If you send it
a bi-polar signal, half of the signal will be clipped and can cause malfunctions in extreme cases.
Sending a signal above 5 Volts is also unsupported.
These are the 2 types of plugs that are required to plug QuNexus into a CV device. The TRS
type is for the CV output ports and the TRRS type is for the CV input port.
The image below gives a detailed view of the 2 QuNexus CV output ports and the CV input port:
●
Output CV Port 1
○
Tip - CV 1
○
Ring - Gate
●
Output CV Port 2
○
Tip - CV 3
○
Ring - CV 2
●
Input CV Port 1
○
Tip - CV 1
○
1st Ring - 5 volts out for expression pedal
power
○
2nd Ring - CV 2
11
