Keenon Robotics Co.,Ltd
14
3.5 Charging
3.5.1 Automatic Intelligent Charge-back of the Robot
The robot is provided with the function of intelligent automatic charge-back. When the following
two conditions are satisfied, the robot will automatically return to the position of charging pile for
charging. The user should ensure that the position of charging pile is fixed well and the electricity is
good.
The electric quantity of the robot is lower than the charge-back value set by the user.
The robot is beyond the working period and the power consumption is not up to 100%.
For setting the trigger condition of automatic charge-back, the user should refer to the “Charging
Setting” section of this Manual.
3.5.2 Manually Triggering the Robot for Charging
The user can trigger and control the robot to automatically charge-back via the PEANUT APP. The
operating steps are specifically as below:
①
Click the [Power Management] menu to display the setup page of power management.
②
Click the [Auto Charge] button, and the robot will automatically find the charging pile for
charging.
③
After the robot reaches the position of charging pile, it will start to automatically match and
connect the charging pile.
④
The robot starts charging after matching and connecting with the charging pile, and the page
will jump to the display page of charging.
The user can also manually push the robot to the charging pile for charging. The operations are
specifically as below:
①
Click the [Power Management] menu to display the setup page of power management.
②
Click the [Manual Charging] button, and the page will jump to the page of manual charging.
③
Manually push the robot to the position of charging pile, and the page will jump to the prompt
page.
④
Align the back of the robot with the electric pile, and then push the robot onto the electric pile
