Keenon Robotics Co.,Ltd
10
3.3 Settings
The user can set the robot via the PEANUT APP, and the steps to enter the setup page of the robot are
specifically as below:
①
Click the “III” icon in the upper left corner of the home page to enter the menu page of the
software function theme.
②
Click the icon of the [Robot Settings] of the PEANUT APP to enter the setup page.
3.3.1 Connect WI-FI
When using it for the first time, the user should access the robot to the network via WI-FI, and the
setup steps are specifically as below:
①
Turn on the WLAN (WI-FI) function of the system and search for available WI-FI.
②
Select the available WI-FI and enter the password.
③
Click the [Connect] button until WIFI connection is successful.
3.3.2 Charging Settings
The operating steps for setting the [Amount of Automatic Charge-back] of the robot are
specifically as below:
①
Click the [Power Management] menu to display the setup page of power management.
②
Slide the page upward to find and click [Electric Quantity of Automatic Charge-back].
③
Enter the numerical value and save it.
The operating steps for setting the [Minimum Power Consumption] of the robot are specifically as
below:
①
Click the [Power Management] menu to display the setup page of power management.
②
Slide the page upward to find and click [Minimum Power Consumption]
。
③
Enter the numerical value and save it.
During the working time, when the electric quantity running the robot is lower than the [Electric
Quantity of Automatic Charge-back], the machine will automatically reach the specified charging pile
