���
Join the end frames
Place one
end frame
on the floor with the
brackets
pointing upwards, position a
long beam
over each
bracket
, ensuring the small groove in the
beam
is
uppermost. Place the other
end frame
over the beams
and tighten the
grub screws
ensuring there are no
gaps between the
beam
end and the
legs
.
훽
Fit the moulded
leg-end caps
.
➤
Workbench or Table Extension
SECTION 2
When ordering an extension unit to an existing standard bench, order one
end frame
with the same order prefix as the bench. e.g.
Order a PA01
end frame
to extend a PA03 bench.
Then order the
beams
and
brackets
bearing in mind the
leg
is 4cm (1
9
/
16
”) square.
Plastic trim is also available seperately.
���
Assemble the
end frame
as in Section 1;
���
Attach the joining brackets to the legs on the side of the bench being extended;
���
Position the
beams
and
end frame
then tighten the
grub screws
ensuring there are no gaps between the ends of the
beams
and the
legs
.
훽
