���
(Continued)
We will assume for the purposes of these instructions, that the style on the left is required.
Using the
spacer
, fit two
brackets
to the top of each
leg
ensuring the brackets are fitted the correct way round - with the flat
faces towards each other.
Attach
joining brackets
to the bottom
of the
legs
, using a tape measure, or
self made spacer to position them
accurately to your requirements.
Put
grub screws
in each of the two large
holes in every
bracket
, only screw them in
by 2 or 3 turns.
���
Make the end frames
Fit two
short beams
between two
leg
assemblies ensuring the small
groove in the
beam
is uppermost. Pulling the two
legs
together -
closing any gaps between the end of the
beam
and the
legs
- tighten
all the
grub screws
using the long end of the allen key first then the
short end to lock them.
Repeat for the second frame.
➤
➤
✓
✘
➠
➠
➠
SHORT BEAM
SHORT BEAM
LEG
LEG
