SPECIAL ASSEMBLY NOTES AND PRECAUTIONS
Both the
beam
and
leg
sections feature special webs which are intended to collapse locally under pressure from the conical end of
the
grub screw
. The result is a permanent and secure position for each
grub screw
which is designed to prevent collapse of a
structure under load in the event of one or more
grub screws
working loose over a period of time.
It is essential that the
grub screws
are clamped up tight. Use the ball end of the Allen key to initially tighten the
grub screw
,
then when you are satisfied that the components are located in the correct position, always fully tighten the
grub screws
with the
short leg of the Allen key in the screw head using additional leverage of the long leg
(possibly another 1
1
/
2
turns or so)
.
For the reasons described above it is important to locate each component carefully before tightening fully because a small
adjustment
(less than 5mm or
3
/
16
”)
will be difficult afterwards. Large realignments will present no problem.
Construction Details
Workbench or Table
Section 1
Workbench or Table Extension
Section 2
Matboard Storage Unit
PD02 & PD07
Section 3
Adding a Matboard Storage Unit Extension
PR02 & PR07
Section 4
Matboard Storage Unit with Extension
Section 5
Covering the Worktop with Fabric
Section 6
Fitting the Worktop
Section 7
Fitting Cantelever Matcutter Supports
Section 8
