Excalibur 3S user guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 25 of 27
4.5 Adjusting the clamp pressure
The pressure of the clamp is in relation to the amount of pressure applied to the operating handle. However in time the
maximum clamping pressure can reduce due to wear on the friction black (hidden within the machine), compensation for this
can be made by adjusting the two small grub screws in the operating handle housing as shown. Turning the screws
clockwise will increase the maximum clamping pressure.
Turn both screws all the way in and then undo by a quarter of a
turn, slight adjustment can be made to fine tune the pressure.
Do not operate the clamp with the adjustment screws tight.
