Excalibur 3S user guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 10 of 27
To change the cutting blade, undo the blade clamping screw a
number of turns to release the blade.
Change or turn over the blade, insert it back into the turret as far
as it will go. Tighten the blade clamping screw, the safety pin
will engage to hold the blade in position. At this point the
position of the blade support plates can be adjusted to suit the
thickness of material being cut, further tightening of the screw
will clamp the blade in position.
Rotate the turret back to the cutting position. Replace the guard
ensuring it is locked closed.
