Excalibur 3S user guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 16 of 27
3.3 Using the twin wheel cutter
The twin wheel cutter must be parked above the top level of the clamp when not in use otherwise the cutter will interfere
with the sightline strip if the clamp is operated.
The twin wheel cutter is mounted on the upper cutting head and is used for cutting rigid materials such as aluminium
composite panel and MDF up to 3mm (1/8”). Many other softer boards and card can also be cut, trials should be carried out
to ensure the desired quality of cut is obtained.
Position the material in the machine and apply the clamp.
Bring the twin wheel cutter down until it makes contact with the
sheet edge and stop. Take a firm grip and then push the cutter
down through the material without stopping.
The cutting wheels generally last more than a year with average use but this is dependant upon daily use and the material
