Excalibur 3S user guide
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 24 of 27
Hold onto the handle, remove the white screw, and move the
head up and down carefully. The two bearing blocks should drop
out.
Rotate the head until it comes loose from the machine.
Use a 2mm Allen (Hex) key to remove the screws holding the
internal bearings in place.
Reverse these steps to re-install. Refer to
