9
HALO - ANDY TIMMONS DUAL ECHO
EXPRESSION PEDAL INPUT
You must use a TRS (stereo) expression pedal
with the HALO.
When a TRS (stereo) expression pedal is inserted, the
expression pedal defaults to controlling the BLEND control
of the delay.
Note: Plug a mono Tap Tempo box into the TRS EXP. PEDAL
jack to allow the control of the Tap Tempo & Infinite Hold.
This method controls the active Side only.
CLEAR ALL EXPRESSION SETTINGS
To clear ALL expression pedal settings, enter Expression
Pedal Mode by holding the FDBK knob for 1 second. Once in
Expression Pedal Mode, hold the SIDE A footswitch for 1 second
to clear ALL expression pedal settings. Once finished, exit
Expression Pedal Mode by holding the FDBK knob for 1 second.
FACTORY RESET
1. Unplug the 9V AC barrel connector from your HALO.
2. Press and hold down the FDBK knob and the
SIDE A and SIDE B footswitches simultaneously.
3. Plug the 9V DC barrel connector back into your HALO.
4. Release the FDBK knob, SIDE A and SIDE B Footswitches.
You will see all of the lights on the HALO cycle, indicating
that the Factory Reset is complete.
Note: When making these adjustments, it helps to place the
HALO on a flat surface, such as a pedalboard or a table top.
ASSIGN A PARAMETER TO AN EXPRESSION PEDAL
1. Hold FDBK knob for 1 second to enter Expression Mode.
2. Set connected expression pedal to heel-down.
3. Turn a HALO control knob to the desired
heel-down setting.
4. Set the expression pedal to toe-down.
5. Turn the same control knob to the desired
toe-down position.
6. Hold FDBK knob for 1 second to save your settings.
Note: You can set multiple parameters at once to be
controlled with your expression pedal. You can set partial
ranges, reassign ranges, or even reverse heel/toe positions in
this mode. The sky is the limit!
UNASSIGN A PARAMETER FROM AN EXPRESSION PEDAL
1. Hold FDBK knob for 1 second to enter Expression Mode.
2. Set connected expression pedal to heel-down.
3. Turn each knob a small amount to let the HALO know you
don’t want the control to be ‘expression controlled’.
Don’t touch controls still assigned to the expression pedal.
Note: Any parameters that were not moved will maintain
their previous expression status.
4. Set the expression pedal to toe-down.
5. Hold the FDBK knob for 1 second to unassign and save.
Note: You can save expression pedal settings to any of the
4 HALO preset locations.
EXPRESSION PEDAL USE AND FACTORY RESET
The HALO allows you to set control parameters with an optional expression pedal
Summary of Contents for HALO
Page 1: ...INSTRUCTION MANUAL...
