4
PRIMARY CONTROLS
1
4
7
2
3
5
8
1
TIME
- Sets the length of delay from 5ms to 1500ms.
4
RATE
- Sets the rate of modulation of the delay from
0.1Hz - 10Hz.
3
FDBK
- Sets the regeneration (number of repeats) of the delay.
Pressing the FDBK knob enters ‘Preset Mode’. (See page 8 for
more on saving presets.)
5
DEPTH
- Sets the amount of modulation of the delay.
6
TOGGLE SWITCH
- Push to the right to advance through
the HALO’s 4 Preset Banks.
7
STOMP SWITCH A
- Turns on or off Side A of the HALO.
8
9
STOMP SWITCH B
- Turns on or off Side B of the HALO.
STATUS LIGHTS
- Once a knob has been moved from the
preset position, the STATUS LED will illuminate. To find
the original knob position, turn the knob until the STATUS
LED turns off. Upper A&B lights mirror stomp switch
indicators and illuminate when Sides A or B are engaged.
2
LEVEL
- Sets the level of the delay.
6
9
Summary of Contents for HALO
Page 1: ...INSTRUCTION MANUAL...
