7
HALO - ANDY TIMMONS DUAL ECHO
Tap Tempo can be activated by pressing and holding the active side’s stomp switch for 1 second. The bypass LED for the active
side will flash the current tempo to indicate that it is in TAP mode. TAP mode will automatically exit after 5 seconds if no tap is
detected. TAP mode can also be exited by pressing and holding the bypass switch for the active Side for 1 second.
WHEN SIDE A IS ACTIVE
PRESS AND HOLD SIDE A STOMP
THEN TAP FOR TAP TEMPO
WHEN SIDE A IS ACTIVE
PRESS AND HOLD SIDE B STOMP
FOR MAXIMUM FEEDBACK
WHEN SIDE B IS ACTIVE
PRESS AND HOLD SIDE B STOMP
THEN TAP FOR TAP TEMPO
WHEN SIDE B IS ACTIVE
PRESS AND HOLD SIDE A STOMP
FOR MAXIMUM FEEDBACK
TAP TEMPO MODE
Control the time of the HALO’s delay with our handy Tap Mode
Maximum Feedback can be achieved by pressing and holding down the stomp switch for the preset that is
not
active
Once the switch is released the feedback level will return to its previous level.
INFINITE HOLD
Freeze the HALO’s sound for as long as you wish with intuitive Maximum Feedback
Trails can be activated/deactivated by holding down both stomp switches while connecting your
9V AC barrel connector
. When
trails is active, the HALO features a ‘spillover’ effect, meaning when changing from Side A to Side B within a Preset Bank, the
previous Side’s effect will carry over to the other side.
Note: The HALO comes with trails engaged as default.
TRAILS OR TRUE BYPASS
Choose what works best for you
Dry signal can be toggled on and off by holding down the Side A stomp switch and FDBK knob connecting your
9V DC barrel connector.
ALL WET / DRY MODE
A
B
A
B
A
B
A
B
Summary of Contents for HALO
Page 1: ...INSTRUCTION MANUAL...
