5
1
FDBK (PRESS) ALT
- Press and hold the FDBK knob while
manipulating other knobs to access secondary controls.
2
HIGH PASS FILTER
- Sets the cutoff frequency for a
single-order high pass filter in the feedback loop. The
frequency ranges from 0Hz at full CCW to 300Hz at
full CW.
3
SATURATE
- Acts as tape compression and saturation,
allowing you to mimic the grit and feel of vintage
tape delay units. Additional low pass filtering is also
introduced as saturation is increased.
5
RHYTHM
- Sets the subdivision of delay. Subdivisions from
CCW to CW: Quarter, dotted eighth, Halo, Bucket Brigade
(BBD), Multi-Tap Tape Delay.
RHYTHM MODES:
4
TONE
- Controls the tone of the delayed signal. The range
of the cutoff frequency runs from 1000Hz at full CCW to
8750Hz at full CW.
HALO - ANDY TIMMONS DUAL ECHO
Hold down the FDBK knob while
manipulating other knobs to access
secondary controls.
2
4
3
1
5
SECONDARY (ALT) CONTROLS
Access four alternate tone and time shaping controls by pressing and holding the FDBK knob while turning other controls
QUARTER
NOTE
DOTTED
EIGHTH
ANDY
TIMMONS
HALO
BUCKET
BRIGADE
TAPE
DELAY
Summary of Contents for HALO
Page 1: ...INSTRUCTION MANUAL...
